Capabilities
Test & Inspection
Dicing
Die Attach / Flip Chip
Wire Bonding
Encapsulation
Environmental Life Test
Bottomnav
Bottomnav Home Bottomnav Capabilities Bottomnav Markets Bottomnav Services Bottomnav Applications Bottomnav News Bottomnav About Us Bottomnav
Bottomnav

Home
Contact Us
item1

HAST
Unsaturated or saturated humidity control
Multi-mode system (wet bulb/dry bulb) controls
humidity at steady state and during ramps
Programmable controller with temperature, humidity,
and count-down display
12 Specimen power terminals, allows power-up of
specimens
Two feed-through ports
Meets specification EIA/JEDEC Test Method A110
& 102C

Thermal Shock
High temperature exposure: 60°C to 200°C
Low temperature exposure: -65°C to 0°C
Temperature stability: ±0.5°C
Feed-through port
Meets specifications Mil-Std 883 1010.7/1010.8,
IEC 61300-2-47, JEDEC JESD47E, JESD22-A104

Thermal/Humidity Cycling & Steady-State
Temperature range: -35°C to 180°C
Temperature stability: ±0.3 °C (up to 100°C)
Heating rate: 5.2 °C/min
Cooling rate: 3.5 °C/min
Humidity range: 10% to 98% RH
Humidity stability: ±2.5 % RH
Feed-through port
Meets specifications JESD22-A100C,
JESD22-A101C, IPC/JEDEC J-STD-020D.1

Accelerated UV Durability
30x irradiation over conventional weatherometers
Acceleration factors up to 110x (material dependent)
Irradiation: 1500W/m2
Light wavelength: 295-450nm
Light uniformity: 90%
Temperature control: 50°C to 85°C during
irradiation; 35°C to 75°C during dark; 30°C
during dew
Humidity control: 40% to 70% RH during irradiation;
50% to 90% RH during dark; 97% to 100% RH
during dew
Black panel temperature stability: ±3°C
Test modes: continuous irradiation or combinations
of irradiation, dew, and dark

Vibration Table
Vibration table test limits:
Sine Force - 40 Ibf Peak
Random Force - 28 Ibf rms
Shock Force - 150 Ibf peak
Acceleration
75g Driven
150g Resonant
300g Shock Pulse
Frequency - up to 6.5 kHZ

Espec 85/85 Chamber
EYE Lighting SUV-W161
Espec HAST Chamber
Espec Thermal Shock Chamber
Espec Thermal Cycling
Vibration Table
item2
Test & Inspection